The rectifier transformer (hereinafter referred to as transformer) is a dry transformer that mainly applies to the urban trolleybus traction substation.
The rectifier transformer (hereinafter referred to as transformer) is a dry transformer that mainly applies to the urban trolleybus traction substation.
2OkV Distribution Transformers The abbreviation "change" refers to a static electrical appliance in a power distributionsystem that converts AC voltage and current according to the law of electromagnetic induction to transmit AC power. In someareas, power Transformers with a voltage level below 20 kV are called "distribution Transformers" or""blending" for short. Theinstallation of "matched" places and places is both a substation. Distribution Transformers should be installed on the columnor open floor installation.
This product has the performance of low no-load loss, low no-load current and low noise.ltimproves the quality of voltageand the reliability of power supply, and is a green energy-saving equipment that is beneficial to the environment.
S10 transformer is a 11kV class S10 series fully sealed transformer. lt introduces the new technology of Shenyang Transformer Research Institute and adopts a fully oil-filled sealed type without oil storage cabinet. The transformer changes itsoil body due to changes in temperature and load, which is completely regulated by the elasticity of the transformeroiltank.
the high-voltage winding is made of enamelled copper wire, and the low-voltage winding is made of copper foil.T he highvoltage winding is filled with glass fiber felt and poured by imported epoxy resin without filler in vacuum state . After curing,it forms a solid whole with high mechanical strength, less partial discharge and high reliability.
the high-voltage winding is made of enamelled copper wire, and the low-voltage winding is made of copper foil. The highvoltage winding is filled with glass fiber felt and poured by imported epoxy resin without iller in vacuum state . After curing.it forms a solid whole with high mechanical strength, less partial discharge and high reliability.
the core is wound with amorphous alloy strip, and the structure of three-phase five-column core or three-phase three-column coil core is adopted as required.The section of the core is rectangular.
the high voltage coil adopts segmented cylindrical coil, thin insulation sealed vacuum pouring, large capacity winding withaxialair passage, high voltage resistance level of the coil, low local discharge, dust prevention and cooling effect.
