Touch-sateh neater for the use In enclosures With electrical / electronical components. The design of the heater supports the natural convection which results In a hlah air-Current of warm air. The surface temperatures on tne accessible side surfaces of the housing are kept down as a result of the heater design.

Touch-safe heater for the use in enclosures with electrical-electronical components. The design of the heater supports the natural convection which results in a high air -current of warm air. The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.

Fan heater prevents formation of condensation and provides an evenly distributed interior ai r temperatu re in enclosu res with electric/electronic components. The heater is connected using the internal terminal connectors The CS 028s small size make it ideal for use in enclosures where space is at a premium.

DJR-type aluminum alloy comb heater is a new type of electric heater designed specifically for moistureproof and dehumidification of power equipment. The heater is composed of a dedicated aluminum alloy heat dissipation plate and high-quality alloy heating wire.

DJR-G silicone rubber heater is a new type of ultra-thin, anti scald, and waterproof heater that adopts silicone onetime molding technology (unique in China). It has small size, long service life, uniform heat dissipation, waterproof and anti scald functions, and is easy to use. It is an ideal substitute for traditional heaters.

One way condensation control:
① When the ambient humidity exceeds the condensation value, start the load;
② After starting the load, when the humidity drops to (condensation value return difference), turn off the load;
③ The condensation setting value is set before leaving the factory and cannot be modified by the user; ④ Manual/automatic control.

Two way condensation control:
① When the ambient humidity exceeds the condensation value, start the load;
② After starting the load, when the humidity drops to (condensation value return difference), turn off the load;
③ The condensation setting value is set before leaving the factory and cannot be modified by the user;
④ Manual/automatic control.

One way temperature control:
① The product is divided into ascending temperature type and descending temperature type, which are set before leaving the factory;
② The temperature setting value is set before leaving the factory and cannot be modified by the user;
③ Manual/automatic control.

One way condensation control, one way temperature control (heating type):
① The condensation setting value is set before leaving the factory and cannot be modified by the user;
② The temperature setting value is set before leaving the factory and cannot be modified by the user;
③ Manual/automatic control.

One way temperature control:
① The product is divided into ascending temperature type and descending temperature type, which are set before leaving the factory;
② The temperature setting value is set by the user.

One way condensation control, one way temperature control:
① The product is divided into ascending temperature type and descending temperature type, which are set before leaving the factory;
② The condensation setting value is set before leaving the factory and cannot be modified by the user;
③ The temperature setting value is set by the user.

One way condensation control, one way temperature control:
① Users can set their own heating and cooling modes;
② The setting value of condensation is set by the user; ③ The temperature setting value is set by the user;
④ Equipped with sensor error correction function (-20 ℃ ~ 20 ℃ );
⑤ Visually display the measured humidity.