DFW European style cable distribution box
Short Description:
European style cable distribution box is a cable engineering equipment widely used in power distribution network systems in recent years. Its main features are bidirectional opening of doors, use of docking sleeves as connecting busbars, and advantages such as small length, clear cable arrangement, and no need for large-span crossing of three core cables. The cable connectors used comply with DIN47636 standard. Generally, bolt fixed cable joints with a rated current of 630A are used.
Product details
European style cable junction box
European style cable distribution box is a cable engineering equipment widely used in power distribution network systems in recent years. Its main features are bidirectional opening of doors, use of docking sleeves as connecting busbars, and advantages such as small length, clear cable arrangement, and no need for large-span crossing of three core cables. The cable connectors used comply with DIN47636 standard. Generally, bolt fixed cable joints with a rated current of 630A are used.
European style cable distribution box adapts to the environment:
1. Environmental temperature: Temperature:+40C, low temperature -30C<Wind speed: equivalent to 34m/s (not greater than 700Pa)
2. Humidity: The average daily relative humidity should not exceed 95%
The average monthly relative humidity is not greater than 95%
3. Seismic resistance: horizontal acceleration not exceeding 0.4m/s2, vertical acceleration not exceeding 0.15m/s2;
4. Installation site inclination: not greater than 3 °
5. Installation environment: The surrounding air should not be significantly polluted by corrosive, flammable gases, water vapor, etc., and the installation site should not experience severe vibrations.
6. When ordering this product beyond the above conditions, please consult with our company.
The DFW-12 series cable junction box is designed for outdoor use, with a fully sealed structure, full insulation, dust-proof, moisture-proof, flood resistant, corrosion-resistant, and strong environmental adaptability. The cabinet protection level reaches IP33. The cable joint bracket is made of stainless steel material, and the shell is made of stainless steel plate or cold rolled plate spray coating.
The cable joint bracket is located at the upper part of the junction box, used to support the conduit, which is used to fix the cable joint. If it is equipped with a lightning arrester, the arrester is installed at the end of the cable joint. In addition, short-circuit fault indicators and live displays are also installed in the distribution box. The live parts of the main circuit inside the box are insulated with prefabricated plug-in cable terminals. The cable partition is located at the bottom of the box, with cable fixing clips and grounding terminals. The box layout is reasonable, the volume is small, the structure is compact, the appearance is beautiful and generous, the installation is simple, and maintenance is free.
